... News | Langir Electric News - Langir Electric

Big Current anti vandal switch

Big current >15A

Big Current Anti Vandal Switches >15A

Big Current Anti Vandal Switches >15A

This product shell can be made of stainless steel, brass and aluminum alloy material can effectively prevent product damage by external forces, Anti-Vandal IK09/ Sealed IP65, the surface of the product easy to clean.

Features:

  • Big range bushing diameters(19~25mm)
  • Stainless steel – available with LED illumination and engraving
  • IP67 Dust and water resistant, Sea-water and detergent resistant

Micro-trip & Economy of 22mm Anti Vandal Switches

Micro-trip & Economy of 22mm Anti Vandal Switches

This product shell can be made of stainless steel, brass and aluminum alloy material can effectively prevent product damage by external forces, waterproof pole IP65, anti damage grade IK09, the surface of the product easy to clean.

L22& L22A Order Code:
22mm Anti Vandal Switches

L22M Order Code:
Micro-Trip Anti Vandal Switches
Features:

  • Save cost approx 40% than same series
  • Stainless steel – available with LED illumination and engraving
  • IP67 Dust and water resistant, Sea-water and detergent resistant

DownloadDownload (494KB)

    Piezo Switch Piezo Switch Piezo Switch Piezo Switch Piezo Switch
    Piezo Switch Piezo Switch Piezo Switch Piezo Switch Piezo Switch

    About piezo switch

    Conventional electromechanical switches have moving parts that inevitably wear out
    The reliability of the electromechanical switches can be reduced by contaminants such as moisture and dust that will foul contact points
    The solution is a Piezo Switch with no moving parts

    How a Piezo switch works?

    2 Wire leads

    Finger pressure is applied to the surface of the switch-housing which deflects about 2 microns.
    This pressure activates the piezo crystal that converts this pressure to an electrical signal that is amplified by electronics imbedded within the housing.

    LANGIR Piezo Technology

    Piezo switch Piezo switch Piezo switch Piezo switch

    The LANGIR® technology is based on a single VPM (Versatile Piezo Module) mechanically assembled without the use of adhesives nor soldering. The VPM is encapsulated in a metal, one piece construction housing, custom designed or as per industry standard, creating the most reliable and durable switch and keypad.
    The LANGIR® product line spans from single switches via a variety of keypads and control panels to full size keyboards. Virtually indestructible the LANGIR product line is rugged, sealed, tamper and vandal proof, with metal housing and solid state electronics featuring unprecedented durability and reliability.

    LANGIR Piezo Technology Applications

    We manufacture over 4000 custom made products covering a full spectrum of applications: Food Processing • Petroleum Dispensing • Clean Room Interfaces • Internet Kiosks • Access Control • Fluid Dispensing • Mining Equipment • Emergency Call Systems • Dairy Equipment • High-End White Appliances • Oceanographic Instruments • Elevators • Conveyers • Car wash • Weighing Devices • Military applications and many more

    Technical Characteristics:

    Mechanical Specifications:

    • Water Resistance: Up through IP68
    • Connection: Wireleads PVC wires 30cm 24AWG
    • Materials: Aluminum & Stainless Steel
    • Minimum Actuation Force: 5 – 15N+ (Typical)
    • Mechanism: 100% Solid-state, No Moving Parts
    • Operational Life: +20mm cycle, -40C to 70C (Typical)

    Functional Operation Specifications:

    • Momentary / Latching
    • Normally Open / Normally Closed
    • Impact: 1kg Shock Test
    • Make / Break via Transistor

    Electrical Specifications:

    • Voltage:
      Standard 200mA 24VAC/DC – option 1A 24VAC/DC
      NC functions standard 100mA 24VAC/DC or per customer specifications
    • LEDs Voltage: 12V DC Standard
    • Current: 200mA or per customer specifications
    • Contact Resistance: None
    • Contact Bounce: None
    • EMI/RFI: No Effect

    Wiring Schemes:

    2 Wire leads3 Wire leads

    DownloadDownload (5.71MB)

    Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch
    Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch
    Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch
    Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch Anti Vandal Switch

    Vandal resistant switches (sometimes referred to as vandal proof switches or tamper-proof switches) are electrical switches designed to be installed in a location (or device) and application where they may be subject to vandalism or tampering, as in the case of pedestrian crossing switches, or fraudulent or unauthorized use, as in the case of vending machine switches. Vandal resistant switches that are located on devices that are accessible to the public or which are located outside also have to be able to withstand dust, rain, snow, and frequent operation.

    Pushbutton vandal-resistant switches are frequently constructed of stainless steel or other durable metals and mounted into panels or housing boxes made out of strong materials, such as polycarbonate plastic, aluminium, or stainless steel. In some cases, the housing may be 1/4″ thick, to protect both the switch and the housing from attempts by vandals to damage the switch or housing using blunt force. The housing for vandal proof switches is often secured using security screws (which cannot be unscrewed with regular screw drivers). The height of buttons in the panel is often minimized by using flush-mounting, to make it more difficult to pry them out, a design technique used in ATM banking machines that are located outside. Some vandal-resistant switches are protected against tampering using other approaches, such as hiding the switches behind a locked or screwed-down door-covered panel, or by requiring a key or passcode before the switch will operate the device.

    DownloadDownload(3MB)

    Economy type of 19mm Anti Vandal Switches

    Economy Type of 19mm Anti Vandal Switches

    This product shell can be made of stainless steel and aluminum alloy material can effectively prevent product damage by external forces, waterproof pole IP65, anti damage grade IK09, the surface of the product easy to clean.

    Order Code:
    Ls19 Anti Vandal Switches

    Features:

    • Save cost approx 40% than same series
    • Stainless steel – available with LED illumination and engraving
    • IP67 Dust and water resistant, Sea-water and detergent resistant

    DownloadDownLoad(401KB)